What are the specific ABS and lug configurations for this Wheel Hub set?

The Detroit Axle Nissan Armada Infiniti QX56 Wheel Bearing features a 6-bolt lug configuration and a sensor wire ABS type for both front and rear positions. These specific configurations ensure the hub matches the requirements for 4WD models of the Nissan Armada and Infiniti QX56 produced between 2008 and 2012.

The Armada QX56 Wheel Bearing utilizes a 6-bolt pattern across both the front and rear hubs. For the front, the hub features a 3-bolt triangular flange, while the rear hub uses a 4-bolt square flange. We selected this set for our comparison because it includes both front and rear pairs to provide a complete suspension overhaul. Because the ABS system relies on these specific sensor wires to communicate with the vehicle’s computer, verifying the wire style is critical; a mismatch can trigger a dashboard warning light or disable traction control. While the 6-bolt pattern is standard for these models, you must confirm your specific vehicle’s hub-centric bore diameter matches the hub’s center to prevent high-speed vibrations. The kit includes the hub and bearing assembly, but you should verify with a service manual whether your specific production year requires a separate tone ring or if it is integrated into the hub design.

What to Check Before Buying the Armada QX56 Wheel Bearing

Before ordering these wheel hubs, confirm these technical details to ensure a correct fit and proper installation.

• Confirm your vehicle’s hub-centric bore diameter matches the hub’s center to ensure the wheel sits perfectly centered.
• Verify your specific production year’s requirements for a separate ABS tone ring versus an integrated one.
• Check your service manual for the specific torque requirements for the hub-to-knuckle bolts versus the lug nuts.
• Confirm if your application requires a specific grease type or if the bearing is a fully sealed unit.
• Ensure you have the necessary heavy machinery or press-fit tools required for your specific axle’s installation method.

Comparing the Armada QX56 Wheel Bearing to Other Hub Options

This product is a complete suspension kit, which provides a matched set of front and rear hubs for a full vehicle overhaul. A buyer looking for a single-wheel repair or a hub with a different flange geometry, such as a 5-bolt pattern, should look at other options in the category. This specific hub is designed for 4WD applications where the sensor wire provides the necessary data for the stability system. If you only need to replace a bearing without replacing the hub housing, you should look for a press-in bearing only rather than a full hub assembly.

If you are looking for heavy-duty truck parts, see our comparison of the best wheel bearing hub for dodge ram 2500.

If you need a complete front and rear hub replacement for a 4WD Nissan Armada or Infiniti QX56, the Detroit Axle Nissan Armada Infiniti QX56 Wheel Bearing is the correct choice for your repair.