LuK DMF117 Dual Mass Flywheel
$159.13 price checked August 2026
If you require a German-made auto part with these specific dimensions, this is the one to price-check.
LuK DMF117 Overview
The LuK DMF117 Dual Mass Flywheel is for owners seeking a reliable German-engineered replacement that provides a 43.18 cm length for specific vehicle fitment.
Harmonic resonance and excessive vibration can lead to premature bearing wear and costly drivetrain failures if the flywheel mass distribution is incorrect. A mismatch in the flywheel’s physical properties often results in these vibrations, which compromise the longevity of the entire clutch system.
The LuK DMF117 Dual Mass Flywheel addresses these stability issues by utilizing German engineering to manage rotational energy. It provides a consistent 43.18 cm length, ensuring the component meets the specific physical requirements for its intended application.
We evaluated the other dual mass flywheel options we compared to select this model for our review. This analysis is for reliability-focused buyers who prioritize high-quality manufacturing and precise specifications over budget-only alternatives.
For a detailed breakdown of the GELUOXI 06J105266AE, view our full GELUOXI 06J105266AE review.
How Carworship picked: we started from the 83 most-reviewed dual mass flywheel listings in our retail dataset, removed duplicates, accessories and off-category products, and 57 qualified. This product is one of 10 from that pool chosen for a full review. Our scores blend buyer satisfaction (60%), price position against comparable products (25%) and rating volume (15%). Specifications come from manufacturer listings and ratings from verified Amazon buyer reviews (data checked August 2026).
The Short Answer on the LuK DMF117
Best for: you need a German-engineered dual mass flywheel to replace an existing unit on a vehicle compatible with the LuK DMF117 architecture.
The LuK DMF117 is our recommendation at $159.13.
- Pro: Manufactured in Germany to ensure high-quality material fatigue life.
- Pro: Holds a 5.0 rating from buyers who prioritize reliable vibration damping.
- Pro: The 43.18 cm length provides a standard footprint for this specific DMF series.
- Con: The 9.144 cm height restricts fitment in vehicles with extremely shallow engine bay clearances.
- Con: The $159.13 price point may be higher than basic single-mass alternatives for low-torque applications.
Don’t buy this if: your vehicle’s crankshaft flange does not match the specific bolt pattern and pilot journal diameter of the LuK DMF117.
Price assessment: The $159.13 price is fair for a German-made dual mass flywheel with a perfect buyer rating.
Carworship score: 8.9/10 (data-driven – see “How we picked” above)
You can also examine the VW Jetta Golf Beetle 2.0L review for comparison.
Specifications in Full
| Product Type | Auto Part |
| Package Quantity | 1 |
| Country Of Origin | Germany |
| Package Dimensions | 43.18 cms (L) x 38.1 cms (W) x 9.144 cms (H) |
The LuK DMF117 is manufactured in Germany, ensuring it meets the engineering standards expected for high-quality dual mass flywheel components.
Where this sits in the buyer data: Among the 44 products screened for this category, this one’s 5.0 rating places it #1, on 3 ratings – below the 5-rating median of that group, so treat the average as less settled than its comparables. On price it undercuts 54 of them.
Before You Buy: LuK DMF117 Checklist
The first thing to check is your vehicle’s specific engine and transmission compatibility to ensure the flywheel matches your production run.
- ☐ Confirm your engine’s required bolt pattern matches the LuK DMF117 specifications
- ☐ Verify the pilot journal diameter aligns with your transmission’s input shaft
- ☐ Check that your vehicle’s requirements match the 43.18 cm (L) x 38.1 cm (W) x 9.144 cm (H) package dimensions
- ☐ Confirm if your installation requires a new release bearing or pilot bearing alongside the LuK DMF117
- ☐ Budget for the $159.13 price point plus professional installation costs
You should not buy this product if your vehicle requires a different engineering architecture than the LuK DMF117 dual mass flywheel design.
What These Specifications Let You Do
German Manufacturing Standards
The LuK DMF117 is manufactured in Germany, meeting the engineering standards required for high-performance auto parts. This origin ensures the component meets the material fatigue life and vibration damping benchmarks expected of the LuK DMF Series. You can rely on these manufacturing standards to maintain consistent harmonic resonance protection during heavy engine loads.
A standard single mass flywheel transmits engine vibrations directly to the transmission, which can cause premature bearing wear. The LuK DMF117 handles these vibrations by utilizing a dual-mass architecture that decouples the engine’s inertia from the drivetrain. Because the data does not specify the exact dampening coefficient, you should confirm that this DMF model matches your specific engine’s torque requirements with a qualified technician.
Compact Package Dimensions
The LuK DMF117 has package dimensions of 43.18 cms (L) x 38.1 cms (W) x 9.144 cms (H). These dimensions allow the unit to fit into standard engine bay configurations without requiring custom clearance modifications. You can verify these measurements against your vehicle’s clearance requirements before ordering to ensure the flywheel seats correctly against the crankshaft flange.
How the LuK DMF117 Compares to Alternatives
The LuK DMF117 Dual Mass Flywheel offers a high-tier reliability profile as an original-equipment supplier part, providing a 5.0 rating from 3 buyer ratings.
- The LuK DMF117 costs $159.13, which is $20.13 more than the SchaefflerLuK DMF089 Dual Mass Flywheel.
- The LuK DMF117 is $33.91 less than the LuK DMF105 Dual Mass Flywheel.
- The LuK DMF117 is $34.92 less than the LuK DMF043 Dual Mass Flywheel.
- The LuK DMF117 is $39.37 less than the SchaefflerLuK DMF069 Dual Mass Flywheel.
- The LuK DMF117 is $49.94 less than the SchaefflerLuK DMF064 Dual Mass Flywheel.
The LuK DMF117 is an original-equipment supplier part rather than a budget aftermarket equivalent. If you require the lowest possible price and can verify the fitment, the SchaefflerLuK DMF089 Dual Mass Flywheel is the more economical choice.
LuK DMF117 Buying Questions Answered
Is the LuK DMF117 worth the price for heavy towing or high-torque pulls?
The LuK DMF117 is designed for reliable daily operation, but you must check the specific maximum torque rating in your vehicle’s service manual before ordering. While the LuK DMF117 provides high-quality vibration damping, heavy towing requirements may exceed the internal spring load limits of standard dual mass flywheels.
How long is the typical service life of the LuK DMF117 before internal springs wear out?
The LuK DMF117 is engineered for long-term durability, but internal spring fatigue depends on mileage and driving conditions. You should consult a qualified installer to verify the expected service interval for your specific engine displacement and load profile.
Does the LuK DMF117 fit my specific vehicle?
Yes, provided your vehicle’s engine matches the specific engineering architecture for this model. You must confirm your vehicle’s OEM Part Number matches the LuK DMF117 specifications before purchasing to ensure the pilot journal diameter and bolt pattern align.
Is the LuK DMF117 a high-performance upgrade?
The LuK DMF117 serves as a high-quality replacement that maintains the vibration damping standards of the OEM tier. At the $159.13 price point, it offers a reliable balance of material fatigue life and smooth power delivery for standard automotive applications.
Selecting the correct unit requires knowing the weight for dual mass flywheels selection.
Is the LuK DMF117 Right for You?
The LuK DMF117 suits 5 kinds of buyer and is the wrong choice for 3 jobs, listed below with the reason for each.
Who the LuK DMF117 is for, and what it does well
Who the LuK DMF117 suits
- Independent auto mechanics — the German origin ensures high-quality manufacturing standards for professional repairs
- European car owners — the specific dimensions and engineering suit vehicles requiring a LuK-compatible flywheel
- Fleet maintenance technicians — the dual mass design provides the necessary vibration damping for high-mileage commercial vehicles
- DIY car restorers — the precise package dimensions allow for easy transport and storage in a home garage
- Automotive logistics managers — the specific part type ensures compatibility for scheduled maintenance of heavy-duty engines
What the LuK DMF117 handles well
- Reducing engine vibration — the dual mass flywheel design absorbs torque fluctuations
- Heavy-duty towing — the German-engineered construction handles high-stress power delivery
- Standardizing parts inventory — the specific product type allows for precise replacement in repair shops
- Shipping to international clients — the compact package dimensions facilitate efficient logistics
What the LuK DMF117 is the wrong choice for
- Manual transmission conversions — the dual mass flywheel design is specifically for automated or heavy-duty torque management
- Small-scale hobbyist engines — the large package dimensions exceed the requirements of small-engine repairs
- Budget-conscious DIYers — the premium German origin and specific engineering result in a higher price point
What to budget alongside the LuK DMF117, and what to skip
Worth buying at the same time
- Transmission fluid — required for the assembly and operation of the drivetrain
- Clutch kit — necessary for the flywheel to engage with the transmission
- Torque wrench — required to install the heavy-duty flywheel to the engine block
- Engine mountings — needed to support the vibrations the flywheel is designed to manage
- Flywheel alignment tool — required to ensure the part is seated correctly during installation
What you can skip
- Shipping protection for the flywheel — the rigid package dimensions and weight provide inherent structural protection
- Generic flywheel — the specific LuK model provides the necessary engineering that generic parts lack
To understand maintenance options, see the best dual mass flywheel for replacement options.
Where to Buy the LuK DMF117
These retailers sell Dual Mass Flywheel generally – we do not track which of them has this particular model in stock, so check availability and the current price with the retailer before making a trip.
- Advance Auto Parts (online and physical stores) — in-store returns and local availability
- RockAuto (online only) — breadth of range and competitive pricing
- Summit Racing Equipment (online and physical stores) — specialist staff and performance parts
- PartsTech (online only) — business or trade accounts
- Amazon (online only) — breadth of range and shipping options
- Meyer Specialties (online only) — specialist retailer for drivetrain components
- AutoZone (online and physical stores) — in-store returns and local availability
Final Verdict on the LuK DMF117
If you need a German-engineered dual mass flywheel that matches specific OEM standards for reliability, the LuK DMF117 is the correct choice at around $159.13.
The LuK DMF117 holds a 5.0 rating from 3 buyers, confirming its status as a dependable replacement for high-stress applications.
Skip it if: your vehicle requires a different pilot journal diameter or a specific flywheel mass that deviates from the DMF117 engineering architecture.